ADB-100 Specification

ADB-100 Audio Digital Box is a professional audio standard in your Reckeen Studio!

PHYSICAL SPECIFICATION

SYSTEM SPECIFICATION

Audio input

  • Digital: digital inputs: 2 x AES/EBU
  • Analog
    • 4x XLR Four channels – professional balanced analogue audio differential input (-10dBV, or 4dBu)
    • Two type of microphones dynamic and condenser with +48V phantom power

I/O Port

Audio Link (using RJ45 up to 50m straight trought cable) galvanic isolation

Audio output

  • Digital: digital output: 2 x AES/EBU
  • Analog
    • 4x XLR Four channels – professional balanced analogue audio differential output (-10dBV, or 4dBu)
    • 1 Jack 6,3 mm – Stereo Headphone output

Power

DC12V

General

  • Pro level: 4dBu reference
  • Frequency response (from 40 Hz to 15 kHz): -0.57, -0.69 dB
  • Noise level: -100.5 dB (A)
  • Dynamic range: 100.5 dB (A)
  • THD: 0.0014 %
  • THD + Noise: -90.2 dB (A)
  • IMD + Noise: 0.0036
  • Stereo crosstalk: -99.4 dB
  • IMD at 10 kHz: 0.0047

Power Consumption

40W

Working Temperature

0 °C ~ +40 °C

Storage Temperature

-20 °C ~ +60 °C

Relative Humidity

≤ 90% (non-condensation)

Net Weight

2,250 kg

Accessories

  • Transmission Cable
  • DC In Power Adaptor

SYSTEM FEATURES

AUDIO LINK

Audio Link (using RJ45 cable) galvanic isolation

1U

Area in a Rack type housing: 1U

12V

12V power supply

XLR OUT

4 x XLR four channels – professional balanced analogue audio two stereo differential output

XLR IN

4 x XLR four channels – professional balanced analogue audio two stereo differential input

HEADPHONES

High – quality headphones output

AES/EBU OUT

Digital outputs: 2 x AES/EBU, (AES3)

AES/EBU IN

Digital inputs: 2 x AES/EBU, (AES3)

-10dBV, or 4dBu

Selectable reference level (-10dBV, or 4dBu)

MIC

Professional balanced analogue audio stereo differential input, dynamic and condenser microphone input ¼”

+ 48V phantom

48V voltage at the microphone input

RECKEEN

Control over signal routing via dedicated software integrated with the Reckeen Studio 3D & Lite application

MVP-100 Specification

MVP-100 is an advanced video converter which allows conversion of UHD input signals into 4 different streams with resolution up to FullHD. Each device has two UHD inputs which are working simultaneously.

PHYSICAL SPECIFICATION

SYSTEM SPECIFICATION

Video input

  • SDI Video Input
    • 2 x – 10 bit HD, 3G levels A and B, 6G or 12G UHD switchable
    • 6 x – 10 bit HD, 3G levels A and B switchable. Usable as Quad SDI 4x3G SDI input for UHD. Can be used as Key+Fill inputs as well.
  • HDMI Video Input
    • 2x HDMI type A connector with support for 2160p60

Video output

  • SDI Video Output: 8 x – 10 bit SD, HD, 3G levels A and B switchable
  • HDMI Program video output:1x HDMI 1.4 type A connector with support for 1080p60

Audio output

  • SDI embedded Audio Output:
    • 8 channels in HD, 3G HD, and UHD

Multiviewer output

  • Live preview of selected outputs:
    • Motion preview – visible rectangles Start, Current, Stop on live input, but only for selected tab 1,2,3 or 4
    • Switcher Preview – complete switcher view.
    • Input / PGM view – switcher view with active Input preview.
  • HDMI video output:
    • 1x HDMI 1.4 type A connector with support for 1080p60

Audio input

  • SDI embedded Audio Input:
    • 8 channels in HD, 3G HD, and UHD

Multi Rate support

  • SDI connections are switchable between standard definition, high definition and UltraHD

Sync input (Genlock)

  • Blackburst or TriSync

Video formats

  • SD Format Support
    • 625/25 PAL,
    • 525/29.97 NTSC
  • 1.5 Gb/s HD Format Support
    • 720p50,
    • 720p59.94,
    • 1080p25,
    • 1080p29.97,
    • 1080i50, 1080i59.94
  •  SDI Compliance
    • SMPTE 259M,
    • SMPTE 292M,
    • SMPTE 296M,
    • SMPTE 425M,
    • SMPTE2082-1
  • 3 Gb/s HD Format Support
    • 1080p50,
    • 1080p59.94
    • 1080p60 levels A and B
  • Ultra HD Format Support
    • 2160p25,
    • 2160p29.97,
    • 2160p50,
    • 2160p59.94

GPIO Interface

  • 8 General Purpose Inputs – triggered motion start

Sampling

  • Audio Sampling: Television standard sample rate of 48kHz and 24-bit HD, 20-bit SD

I/O Intreface

  • RS-232 – channel for MVP100 control panel

Color

  • Color Precision: 10-bit
  • Color Space:
    • REC 601,
    • REC 709

Outputs definition

Each channel has four rectangles definition of the way how input signal is divided into 4 different outputs. Is it done by drawing 4 different windows 1,2,3 and 4. Content bordered by every window will be send to corresponded output.

Physical specification

  • Dimensions
    • 440 x 130 x 55 mm
  • Power Supply
    • Included external 12V / 5A power supply
  • Operating Temperature
    • 5° to 50 ° C (41° to 122° F)
  • Storage Temperature
    • -20° to 45 ° C (-4° to 113° F)
  • Relative Humidity
    • 0% to 90% non-condensing

SYSTEM FEATURES

2 x 4K VIDEO

HDMI 2.0 or 2x SDI 12G, every single 4k input can be replaced by 4 x 3G SDI input. (QUAD)

8 x FULL HD INPUT

We support 8 SDI input with 3G format. Every 4 x 3G SDI input can be replaced by single 4k input.

2 x HDMI 2.0 INPUT

You can selected form 8 SDI input up to 2 as HDMI with supports up to 4k format.

3 MODE INPUT

  • 2 x 4K
  • 1 x 4K and 4 x 3G input
  • 8 x 3G input

TRIGGERS

Tgger in MVP-100, that is windows’ motion control (a virtual camera). You can program up to 8 windows, each with a different type of motion (single, loop, ping-pong, zoom etc.).

RS232 INTERFACE

Communications port for controlling Reckeen External Control Panel MVPkey 100 with Joystick and T-bar.

MULTI RATE

We will support 1080i, 1080p, 2160p and 50 or 60Fps as well, with auto detect functions.

4K AND 3G MIX

You can mix 4k input with 4 x 3G SDI input.

2 x 4K HQ SCALER

High quality 4k scaler on each of the 4k inputs.

6 x FULL HD SCALER

High quality Full HD scalers on each of the Full HD inputs.

AUDIO INPUT

Embedded stereo on each SDI and HDMI input.

LAN

Gigabit Ethernet LAN , for update firmware’s or communications with the MVP100 devices.

INPUT KEY FILL

Input key and Fill

COLOR

Allows you to set the colour on the input.

STILL INPUT

Grab or download still via LAN.

LED INPUT COLORS

The LEDs’ colors indicating current signal format on inputs.

AUDIO OUTPUT

Embedded stereo on each SDI and HDMI output.

TALLY

8 channels Tally Output

8 x SDI 3G OUT

Any one can be set as PGM, PVW or AUX and Clean Feed

2 x HDMI OUT

One is MultiViewer, the second HDMI is always PGM

MV 3 MODE

There are 3 layouts, predefined without config.

  • Animations previews
  • Standard Switcher
  • Modified switcher

OSD

OSD menu to board configurations on MV output.

CROSSFADE AUDIO

The intermingling of audio sources at the video transition.

GPIO

GPIO (General Purpose Input/Output) is an interface used for communication between MVP-100 system components and various peripheral devices. An external device can activate a trigger in MVP-100.

VISUAL EFFECTS

Support T-Bar/Auto – effects as dissolve, effects from list selected from menu.

FADE TO BLACK

Fade to black effect.

8 PRESETS

It allows the device’s configuration and saving presets in the device’s internal memory.

CHROMA KEY

Luminance and chrominance key.

RS422 INTERFACE

External port to control MVP devices via commends.

AUDIO LINK

Reckeen external audio port RJ45.

SYNC INPUT GENLOCK

Allows the specification of the reference signal for output channels synchronization.

1U

Area in a Rack type housing 1U+

ADB-100 – is a professional audio standard in your Reckeen Studio!

ADB-100 Audio Digital Box is a professional audio standard in your Reckeen Studio!

ADB-100 Audio Digital Box

ADB 100 module is designed for professional producers, yet it maintains a size of 1U and a price at a reasonable level. The device is equipped with professional inputs and connections with the highest AES / EBU signal quality (AES3), used mainly in studio technology.

ADB 100 works well at home, in the director’s room, in the studio, in the transmission car as well as on the stage. The richness of various analog and digital interfaces provides maximum flexibility and supports user productivity in the studio.

With ADB 100 your Reckeen Studio is enriched with the highest professional sound quality without any distortions.

CONNECTORS

ADB 100 module is designed for professional producers, yet it maintains a size of 1U and a price at a reasonable level. The device is equipped with professional inputs and connections with the highest AES / EBU signal quality (AES3), used mainly in studio technology.

AUDIOLINK

With its built-in Audio Link interfaces, this device can be installed directly in the studio as well as on the stage. The use of RJ 45 cable and Audio Link technology enables transferring all inputs and outputs stream to greater distances (with a single RJ45 cable). This enables you to separate a recording studio from a closed and acoustically insulated director’s room in which the Reckeen Studio 3D or Lite station is installed. The sound transferred digitally from ADB 100 device through RJ 45 connector maintains the highest quality and avoids noise.

4 x SDI and Genlock in Reckeen 3D Studio PRO!

Reckeen 3D Studio PRO is supported by a very strong hardware platform on which products such as MVP-100 are based. In the first version of firmware, this new platform will extend the capabilities with such features: inputs will support 4 x 3G SDI, 2 X 12G SDI, outputs will support 4 x 3G SDI and 2 x 12G SDI, Independent Program Out will be available on the HDMI output, and the new platform will also support Genlock REF in and Loop.

In the future, depending on the market demand, we plan to increase the number of inputs to 8 x SDI and additional 2 x HDMI v2.0 inputs. As for the outputs of the hardware capabilities, it will be extended to up to 8 x SDI and 2 x HDMI.

The platform is connected to a workstation via the IPass PCI express standard. IPass standard offers a full interconnect system that enables flexible speed and supports Reckeen 3D Studio applications.

Regarding analogue and digital audio, the new platform supports Audio Link interfaces, through which you can connect ADB-100. The use of RJ45 cable and Audio Link technology enables transferring all inputs and outputs stream to greater distances (with a single RJ45 cable). That is why this device can be placed either directly in a studio or on a stage, which enables a user to separate a recording studio from a closed and acoustically isolated control room in which Reckeen 3D Studio Pro platform is installed. The sound transferred digitally from ADB-100 device through RJ 45 connector maintains the highest quality.

Our extended version of Reckeen 3D studio – Reckeen 3D Studio PRO, will be the strongest version by far and it is dedicated to professional broadcasting market. Reckeen 3D Studio PRO will be available from May 2019.

MVP-100 support ADB-100, coming in next firmware release

ADB-100 is an additional, external audio module extending not only functionality of Reckeen 3D, but from now on also MVP-100.  With its built-in Audio Link interfaces this device can be installed directly at a studio as well as on stage. The use of RJ 45 cable and Audio Link technology enables transferring all inputs and outputs stream to greater distances (with a single RJ45 cable).

MVP-100 supports embedded audio and together with ADB-100, it has access to analogue audio input and output as XLR or MIC / Headphone, and also has the highest digital audio standard as AES / EBU signal quality (AES3).